Solution to the workpiece burrs when LaserMen hybrid co2 laser machine cutting the mild steel
According to the working and design principles of hybrid CO2 laser cutting, the analysis shows that the following are the main reasons for the burrs of the processed parts:
1.The upper and lower positions of the laser focus are not correct, and the focus position test needs to be done and adjusted according to the offset of the focus.
2.The output power of the laser is not enough. It is necessary to check whether the laser source is working normally. If it is normal, observe whether the output value of the laser control system is correct. If the output value is not appropriate, adjust it.
3.The cutting line speed is too slow, and cutting speed needs to be increased with the operation control system.
4.The purity of the cutting gas is not enough, it is necessary to provide high-quality cutting working gas.
5.Hybrid Laser Machine Mirror Alignment, we have the guide video for reference.
6.Hybrid co2 laser machine running time is too long, so that the machine can not work stably. Machine needs to be turn off and restart.